How to add a Ditto Receiver - Apple TV

Ditto is compatible with Apple TV 4K, Apple TV HD, Apple TV 3, and Apple TV 2.

  • tvOS (Apple TV HD / 4K)
  • Apple TV 2 / 3
  • How to Set Up Apple TV 4K/Apple TV HD as a Ditto Receiver

    Step 1

    Download the Ditto tvOS Receiver app from the App Store on your Apple TV.

    Step 2

    Open the Ditto tvOS Receiver app. You will see a pairing code.

    Step 3

    Log in to your Ditto Account Portal, click on the "Receivers" tab and click "New Receiver" (or “Add Your First Receiver” if you haven’t added a receiver yet).

    Step 4

    Enter the pairing code displayed on the Apple TV and click "Pair Receiver."

    Step 5

    That's it! Your Apple TV 4K or Apple TV HD will be paired to your Ditto account as a receiver. Next, add the receiver to a room. Learn how to set up rooms.

  • How to Set Up Apple TV 3/Apple TV2 as a Ditto Receiver

    Step 1 - Gather Apple TV network Information

    If you choose to manually add an Apple TV through your Ditto account portal, you will need the IP address and the MAC address. This information can be found on the Apple TV "About" screen.

    The IP address and MAC address will be listed on this screen. Note, Apple TV refers to the MAC address as "Wi-Fi Address" or "Ethernet Address."

    We recommend setting a static IP address for your device to prevent unwanted IP address changes. 

    Step 2

    Log in to your Ditto account and navigate to the receivers section.

    Step 3

    Click “New Receiver” (or “Add Your First Receiver” if you haven’t added a receiver yet). 

    Step 4

    Click on Apple TV 3/2 

    Step 5

    1. Enter receiver name. You can make this whatever you want, but it should be identifiable, such as "Apple TV 3" or "Conference Display."
    2. Enter the network information you gathered in Step 1 and click "Pair Receiver."
    3. Add this receiver to a room. This is how you make a room active. Learn how to set up rooms.

    Once you pair a receiver to a room, you're ready to connect to the room or create connection instructions for your users!

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us